Alcatel-Lucent OmniTouch 8118 - Getting to Know Your Telephone; Phone Controls and Navigation; Status Indicators and Display; Hardware Ports

Getting started
1
6
Switching on your telephone
If the display fails to light or the red LED is flashing, recharge the battery
If the red LED is flashing slowly:
• Check that you're in a WIFI hotspot
• Check that the telephone is properly installed in the system (consult the PABX manager).
Switch off your phone
Your telephone is
switched on
Switch on
(long press)
Wait a few seconds
(about 3s).
Long press on the on/off-hook key until the confirmation popup appears.
To confirm.