Programming your telephone
26
8
• Lock the keypad automatically
You can configure your set so that the keypad is blocked automatically after 5, 10 or 20 seconds.
• Unlocking the keypad
8.14
Activate/deactivate the Key tones
By default the set emits a tone each time a key is pressed.
To deactivate these tones:
8.15
Activate/deactivate the Warning tones
The warning tones inform the user of an abnormal operation (out of range, system activated or halted, etc.).
To deactivate these tones:
Long press
choose the type of key sound
Silent
OR
OR
OR
OR
To Next Page
Loading...
