EasyManua.ls Logo

Alcatel 1009A - Power on Your Phone; Power off Your Phone; Getting Started

Alcatel 1009A
14 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
56
Charging the battery
Connect the battery charger to your phone and outlet
respectively.
The charging may take about 20 minutes to start if the
battery is flat.
Be careful not to force the plug into the socket.
Make sure the battery is correctly inserted before
connecting the charger.
The outlet must be near to the phone and easily accessible
(avoid electric extension cables).
When using your telephone for the first time, charge the
battery fully (approximately 3 hours). You are advised to
fully charge the battery (
).
To reduce power consumption and energy waste, when
battery is fully charged, disconnect your charger from the
plug; reduce the backlight time, etc.
The charge is complete when the animation stops.
2.2 Power on your phone
Hold down the
key until the phone powers on.
2.3 Power off your phone
Hold down the
key from the main screen.
2
Getting started ........
2.1 Set-up
Removing and installing the back cover
Removing and installing the battery
Inserting and removing the SIM card
Place the SIM card with the chip facing downwards and slide it
into its housing. Make sure that it is correctly inserted. To
remove the card, press it and slide it out.
Your phone only supports mini SIM card. Do not
attempt to insert other SIM types like micro and
nano cards, otherwise you may damage your
phone.
IP4572_ALCATEL 1009A_QG_Eng_USA_04_140120.indd 5-6IP4572_ALCATEL 1009A_QG_Eng_USA_04_140120.indd 5-6 2014-1-20 15:09:232014-1-20 15:09:23

Related product manuals