Alcatel 1054D - Getting Started; Set up

11
1
Getting started ........................................
1.1 Set up
Removing and installing the back cover
Removing and installing the battery
Inserting and removing TF card
Inserting and removing the SIM card
(1)
1054X
孔揜SIM◰䯉㎞⦍(◤◰

1054D
孔揜SIM◰䯉㎞⦍(♛◰᧥
Place the SIM card with the chip facing downwards and slide it into its housing. Make sure that it is
correctly inserted. To remove the card, press it and slide it out.
(1)
Check with your network operator to make sure that your SIM card is 3V or 1.8V compatible.
The old 5 Volt cards can no longer be used. Please contact your operator.