Alcatel Idol4 S 6070Y User Manual

L1 Service Manual TCL Communication Ltd.
Rev.
ALCATEL 6070K/Y/O Level 1 Service Manual
Page
1.1
1/33
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
Idol4 S
ALCATEL 6070K/Y/O
Note: this manual is non-contractual and TCL Communication Ltd. can modify it without prior
notice on the characteristics of described equipments.

Alcatel Idol4 S 6070Y Specifications

General

Display Size	5.5 inches
Resolution	1080 x 1920 pixels
Processor	Qualcomm MSM8952 Snapdragon 617
RAM	3 GB
Internal Storage	16 GB
Rear Camera	16 MP
Front Camera	8 MP
Battery Capacity	3000 mAh
Operating System	Android 6.0.1 (Marshmallow)
Weight	149 g
SIM	Single SIM (Nano-SIM) or Dual SIM (Nano-SIM, dual stand-by)
Display Type	AMOLED
Colors	Dark Grey, Gold

Summary

1. General

2. Portable Label

2.1 Label Zones

Details the different numbered zones present on the device's portable label.

2.2 Zone Information on the Label

Explains the variables and significations associated with each zone on the label.

2.3 Commercial Label Samples

Provides visual examples of commercial labels for different device variants.

2.4 L1 Spare Part List

Directs users to the Forlog system for the latest Spare Part List.

2.5 Accessory

2.5.1 Charger

Shows an image of the device's charger.

2.5.2 Stereo Headset

Displays an image of the stereo headset accessory.

2.5.3 End User USB Cable

Shows an image of the end-user USB cable.

2.6 Maintenance Policy

2.6.1 For Handset

Lists maintenance steps for the handset, including checks and replacements.

2.6.2 For Standard Accessories

Describes warranty and functional checks for standard accessories.

2.6.3 Diagnostic Codes

Provides a list of secret codes for accessing device information and tests.

2.6.4 User Data Format Reset

Explains how to perform a user data format reset and its consequences.

2.7 Cell Phone Maintenance

Equipment for Handset Test

Specifies the necessary equipment for testing the handset.

Recommended Maintenance Tools

Recommends tools such as a PC and an ampere meter for maintenance.

2.8 Invoice Check

2.9 IMEI Check

2.10 Humidity Sensitive Sticker Check

2.11 Visual Mechanical Inspection

2.12 Accessories Inspection

2.13 Cell Phone Maintenance Procedure

Initial Setup and Diagnostic Codes

Steps for SIM check, power on, NCK entry, and using diagnostic codes like *#2886#.

SMARTPA CAL Test

Describes the SmartPA calibration test procedure.

SpeakBOX Test

Details the SpeakBOX test for audio output.

Touch Panel Test

Instructions for testing the touch panel functionality.

LCD Display Test

Steps to check the LCD display for color and brightness issues.

Keyboard Test

How to test the physical keyboard functionality.

Camera Tests (Front, Main, PDAF)

Test procedures for the front, main, and PDAF cameras.

Audio and LED Tests

Tests for audio outputs, LEDs, and vibration motor functionality.

NFC and USB/Charger Tests

Procedures for testing NFC, memory card, USB, and charging functions.

Sensor Tests (SIM, BT, Wi-Fi, GPS)

Tests for SIM detection, Bluetooth, Wi-Fi, GPS, and other sensors.

Firmware and Factory Reset

Procedures for checking firmware and performing a factory data reset.

3. Software Download

3.1 Required Equipment

Lists the necessary equipment for software download.

3.2 Install Driver

Instructions for installing the necessary drivers for the download tool.

3.3 SW Download Process

Steps to perform software download using the Sugar QCT_SP tool.