Alcatel OmniPCX Office User Manual

24
2
24
2.6
Placing a call on hold (HOLD)
During a call, you may place the call on hold and recover it later, on the same
telephone
2.7
Parking a call
You can park a call and retrieve it on another extension:
• To recover the parked call:
The call is placed on
hold
Press the line key with icon
to recover the call on hold
Hold
You are on a call with the
destination number
“Parking” feature
code
Number of telephone
from which call was
parked
“Retrieve parked
call” feature code
Number of telephone
from which call was
parked
If the parked call is not recovered within a preset time (1
min 30 by default), it is either transferred to the attendant
or it rings back the extension that parked the call,
depending on system configuration.
Park
OR
PickUp
RetPrk
OR
AADMU060-040
AADGR030-060
AADGR030-015

Alcatel OmniPCX Office Specifications

General

VoIP Support	Yes
SIP Support	Yes
ISDN Support	Yes
Analog Support	Yes
Integrated Voice Mail	Yes
Auto Attendant	Yes
Conferencing	Yes
VoIP Protocols	SIP, H.323
Power Supply	100-240 VAC, 50/60 Hz
Network Interfaces	10/100 Mbps Ethernet
Humidity	10% to 90% non-condensing