EasyManua.ls Logo

Alcatel Tribe 3040D - Getting Started: Power and Interaction; Powering the Phone On and Off; Using the Touchscreen Interface

Alcatel Tribe 3040D
42 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17 18
Charging the battery
Connect the battery charger to your phone and mains socket
respectively.
The charging may take about 20 minutes to start if the battery is flat.•
Be careful not to force the plug into the socket.•
Make sure the battery is correctly inserted before connecting the •
charger.
The mains socket must be near to the phone and easily accessible (avoid •
electric extension cables).
When using your telephone for the first time, charge the battery fully •
(approximately 3 hours). You are advised to fully charge the battery (
).
To reduce power consumption and energy waste, when battery is fully •
charged, disconnect your charger from the plug; switch off Bluetooth
when not in use, etc.
The charge is complete when the animation stops.
Power on your phone1.2
Hold down the key until the telephone powers on, type in your PIN
code if necessary and then confirm. The Home screen is displayed.
If you do not know your PIN code or if you have forgotten it, contact
your network operator. Do not leave your PIN code with your
telephone. Store this information in a safe place when not in use.
If Broadcast SMS are displayed, touch to browse through them or press
to return to the Home screen.
While the phone is searching for a network, "Searching/Emergency"
will be displayed.
Power off your phone1.3
Hold down the key until the telephone powers off.
Using the touchscreen1.4
Touch
To access an application, touch it with your finger.
Drag
Place your finger on the screen to drag the object to the destination.
Scroll
Slide the screen to scroll up and down the applications, images, web
pages...at your convenience.