19
Picture-05
Select your User ID (A or B).
Press the START/STOP button. The pump be-
gins to inflate the cuff. In the display, the in-
creasing cuff pressure is continually dis-
played.
After automatically reaching an individual
pressure, the pump stops and the pressure
slowly falls. The cuff pressure is displayed
during the measurement.
When the device has detected your pulse, the
heart symbol in the display begins to blink.
1.
2.
3.
4.
When the measurement has been concluded,
the measured systolic and diastolic blood
pressure values, as well as the pulse will be
displayed.
5.
Sit comfortably in a chair with your feet flat on
the floor. Stretch your arm forward on the desk
and keep relaxing, make sure the palm of hand
is upturned. Make sure arm is in correct position,
to avoid body movement. Sit still and do not talk
or move during the measurement. After the cuff
has been appropriately positioned on the arm
and connected to the blood pressure monitor, the
measurement can begin:
Please refer to Picture-05
Measure Procedure
To Next Page
Loading...