Alcedo B21 - Page 20

20
When the monitor is OFF, press the SET but-
ton. The time and user symbol will display.
Press SET button to turn on the mute.
Press the SET button again to turn off the
mute.
1.
2.
3.
Press SET button and hold it for more than 3
seconds until the User Symbol flash.
Press MEM button to select user A or B.
Then press START/STOP button to turn off
the device.
Mute/Unmute
Switch User
Memory
Press the MEM button. Select a user (A or B).
The first display reading with AVG symbol
is the average of the last 3 results.
Press MEM again to view each result, begin-
ning with the most recent measurement taken.
Press MEM again to view the next result.
Alternatively, press and hold MEM to scroll to
any result.
If it is necessary to interrupt a blood pressure
measurement for any reason (e.g the patient feels
unwell), the START/STOP button can be pressed
at any time. The device then immediately lowers
the cuff pressure automatically.
Discontinuing a Measurement
1.
2.
3.
4.
5.
Viewing the Stored Values
At the end of a measurement, this monitor auto-
matically stores each result with date and time.
Each unit stores 120 sets measurements for 2 us-
ers, totally 240 sets (User A and B).