Alde Compact 3010 - Heating System Maintenance; How the Alde Heater Works

7. Heating with electricity
1 Press the button with the arrow
until the electrical heating symbol
ashes. The “OFF” text is shown
next to the temperature on the
display.
2 Select power (1kW, 2kW or 3kW)
with the +/On or -/Off buttons.
The diagram shows that 3kW
power has been selected (some
boilers are only equipped with
1-2kW).
3 The electrical heating symbol is
shown when the panel returns to
standby.
blinkar
To activate heating with electricity. The greater the power the more rapid the heating will be.
1 Press the button with the arrow
until the electrical heating symbol
ashes.
2 Switch off the electrical heating
by pressing the -/Off button until
all power steps have gone out.
The “OFF” text is shown next to
the temperature on the display.
3 The electrical heating symbol
goes out when the panel returns
to standby.
blinkar
Do as follows to switch off heating with electricity.
blinkar
ashes
ashes
ashes
6. Heating with gas
1 Press the button with the arrow
until the gas heating symbol
ashes. The “OFF” text is shown
next to the temperature on the
display.
2 Select gas heating by pressing
the +/On button. The “ON” text is
shown next to the temperature
on the display.
3 The gas heating symbol is
displayed when the panel returns
to standby.
blinkar
blinkar
Do as follows to activate heating with gas.
ashes
ashes
1 Press the button with the arrow
until the gas heating symbol
ashes. The “ON” text is shown
next to the temperature on the
display.
2 Switch off the gas heating by
pressing the -/Off button. The
“OFF” text is shown next to the
temperature on the display.
3 The gas heating symbol goes
out when the panel returns to
standby.
blinkar
blinkar
Do as follows to switch off the gas heating.
ashes ashes