20
b) Info screen
Temperature of new air exit-
ing exchanger
Ubio heating module in operation
(heating by air, not included)
Cumulative amount of energy recovered (in kWh)
through Aldes HRV*
Strength of radio signal
Filter clogging level
(here little clogging)
Auto mode active:
cooling (or heating)
Temperature of new air
entering exchanger
Reset total kWh to zero:
- Press INFO button for 3+ seconds
- Confirm reset by pressing OK
Reset the Filter timer:
- Press and hold (3 sec) the INFO key
- Press the button (Access to filter reset menu)
- Press OK to confirm reset
* Theoretical calculation not taking into account the features of the system and the dwelling.
To Next Page
Loading...
