ALDI FERREX 706768 - Using the Air Pump

13
MODEL No.: CAP18FA.9 • 10/2021 • 706768
AFTER SALES SUPPORT
e-mail: info.aldi@positecgroup.com
1300 889 028
(toll free)
20 V Li-ion Air Pump
WARNING: Never leave the pump during ination. After inating,
disconnect the pump from object being inated.
Using the air pump
The supplied accessories perform a variety
of functions.
Air chuck of air hose:
The air chuck of air hose (19) can be used to inate a
tyre with valve stem. (See Fig. G)
Presta tyre valve adaptor:
The presta tyre valve adaptor (7) can be used to inate
a tyre.
1. Remove the cap of the presta valve stem by
turning it anticlockwise. (See Fig. H1)
2. Loosen the locking nut of the presta valve stem
by turning it anticlockwise. (See Fig. H2)
3. Screw the presta valve adaptor (7) onto the
locking nut, and then connect the air hose (15) to
the presta valve adaptor (7). (See Fig. H3, H4)
WARNING: To avoid over-ination of tyres,
please check the recommended tyre pressure in the vehicle’s owner
manual. For bicycle tyres, please check the tyre marking.
H1.
H2. H3. H4.
G.