18
AUS
Attachment and operating
• That all moving parts move smoothly.
• That the protective flap (E) is closed and that all security switches (F) are activated
(fig. 15).
Fuel and oil
Recommended fuels
Use only a mixture of unleaded petrol and special 2-stroke engine oil. Mix the fuel mixture
as indicated in the fuel mixing table.
Important: Do not use a fuel mixture which has been stored for longer than 90 days.
Important: Never use 2-stroke oil with a recommended mixing ratio of 100:1. The man-
ufacturer’s warranty will be voided in case of engine damage due to inadequate lubri-
cation.
Important: Only use containers designed and approved for the purpose to transport
and store fuel.
Pour the correct quantities of petrol and 2-stroke oil into the mixing bottle (see scale
printed on the bottle). Then shake the bottle well.
Never use oil for 4-cycle engine or use water cooled 2-cycle engine. It can cause spark
plug fouling exhaust part blocking or piston ring sticking.
Mixed fuels, which have been left unused for a period of one month or more, may clog
the carburetor or result in the engine foiling to operate property. Put remained fuel into
an airtight container and keep it in the dark and cool room.
Fuel mixing table
Mixing procedure: 40 parts petrol to 1 part oil
Example:
1 L Petrol : 0.025 L 2-stroke oil
5 L Petrol : 0.125 L 2-stroke oil
Warning! Take care of the emission of exhaust gases.
Always shut off engine before fuelling. Never add fuel to a machine with a running
or hot engine. Take care of fire!
Only refuel outdoors or in well-ventilated areas. Make sure that no fuel is trapped
in the soil (environmental Protection). Use suitable base.
Filling with fuel
Danger of injury! Fuel is explosive!
Turn the motor off and let the machine cool down.
To Next Page
Loading...