AFTER SALES SUPPORT
17
1300 855 831
support@scheppach.com.au
MODEL: NTS16 PRODUCT CODE: 706650 10/2021
AUS
NTS16 Operation/Maintenance and cleaning
Blowing (Fig. 3)
Use the joint nozzle (16) for blowing applications to clean dust and dirt in hard to
reach places.
IX. Maintenance and cleaning
Pull out the power plug before every maintenance operation. There is a risk of elec-
trocution or of injury from moving parts.
Maintenance
The appliance is maintenance free.
Emptying the Container (Fig. 1)
The container is full if the suction power will decrease signicantly.
Switch o the appliance and disconnect the power plug.
Remove the machine head (2) by opening the locking hooks (4).
Empty the container into a rubbish bin or suitable container for disposal.
Cleaning
It is recommended to clean the appliance after each use.
Never direct a water jet against the appliance, nor clean the appliance under
owing water. This could give rise to the danger of electric shock and damage
the appliance!
Always keep the appliance clean. Do not use any detergents or solvents.
• Always keep the ventilation slots clean and free from dirt and dust.
• Clean the container (6) with a damp cloth.
• Wash the foam lter (13) with lukewarm water and soap and allow to dry.
• Beat the dust out of the cloth lter (18) and clean it with a paint brush or hand
brush.
• Replace the paper lter bag (14) when full.
Replacement parts
Replacement parts can be ordered (e.g. paper bag, lter) by contacting After Sales
Support.
To Next Page
Loading...
