ALDI Ferrex NTS16 User Manual

16
AFTER SALES SUPPORT
 support@scheppach.com.au
 1300 855 831
MODEL: NTS16 PRODUCT CODE: 706650 10/2021
AUS
Operation NTS16
VIII. Operation
m WARNING!
Switch the device o󰀨 if liquid or foam emerges with the exhaust air during wet vacu-
uming.
Switching on/o󰀨 (g. 1)
Press the on/o󰀨 switch (8):
• Switch setting 0: O󰀨
• Switch setting I: On
Dry vacuuming (Fig. 3)
Use the paper lter bag (14) and the cloth lter (18) for dry vacuuming. Always en-
sure that the lters are correctly mounted.
Use the oor nozzle (15) for surface cleaning applications. The joint nozzle (16) is
used for hard to reach areas.
The paper bag (14) is full, when the suction function is noticeably reduced. For emp-
tying instructions, read the "Maintenance and cleaning" chapter.
Wet vacuuming (Fig. 3)
For wet-vacuuming, use the foam lter (13). Ensure that the foam lter (13) is cor-
rectly mounted.
When wet vacuuming, the safety oat valve on the lter basket (11) will close when
the maximum level is reached. The motor will continue running, but the suction will
decrease signicantly. For emptying instructions, read the "Maintenance and clean-
ing" chapter.
Use the oor nozzle (15) for surface cleaning applications.
Danger! The appliance is not suitable for the vacuuming of combustible and hot
liquids.
For wet vacuuming, use only the supplied foam lter (13).

ALDI Ferrex NTS16 Specifications

General

Brand	ALDI
Model	Ferrex NTS16
Category	Vacuum Cleaner
Language	English