Operation
21
Setting the lighting time
1. If necessary, turn motion sensor housing
9
to reach
the TIME controller
4
.
2. Select the desired lighting duration between approx.
10 and 60 seconds by turning the controller in the
corresponding direction:
− Turning the TIME controller clockwise increases the
lighting duration.
− Turning the TIME controller anticlockwise decreases
the lighting duration.
Setting the sensitivity
You can specify at what brightness (e.g. from dusk) the
motion sensor
10
reacts and switches on the product.
1. If necessary, turn motion sensor housing
9
to reach
the LUX controller
2
.
2. Choose the desired sensitivity by turning the controller in
the corresponding direction:
− Turning the controller clockwise increases the
sensitivity so that the motion sensor will react even in
a bright environment. If the controller is on the sun
symbol, the motion sensor reacts around the clock
regardless of the ambient light.
− Turning the controller anticlockwise decreases the
sensitivity so that the motion sensor will only react in
a darker environment. If the controller is on the
crescent moon symbol, the motion sensor only reacts
when it’s night.
To Next Page
Loading...
Need help?
General
