Switching the product on and off
22
• Whether the motion sensor reacts depends on
the speed at which the object is moving. The
sensor will not react to movements that are too
fast or too slow.
• Electrical sensors are more sensitive in cold,
dry weather conditions than in warm, humid
climates.
Adjusting the spotlight heads
You can rotate the spotlight heads
11
90° to the left and
to the right. You can also move each of the spotlight heads
approx. 60° downwards and approx. 90° upwards
(see Fig.E).
− If necessary, remove the tab
1
if you want to align the
two spotlight heads individually. Then align the spotlight
heads as you like (see Fig.F).
Switching the product on and off
− To switch the product on, set the power switch
5
to the I position.
− To switch the product off, set the power switch to the
O position.
To Next Page
Loading...
Need help?
General
