ALDI LIGHTWAY 872-B-S - Page 24

Troubleshooting
24
Fault Possible cause Solution
The product
turns off for
no obvious
reason.
The following
movements or
heat sources can
activate the sensor:
Air conditioning
units, chimneys,
barbecues, street
lights, people,
animals or moving
vehicles.
Find a more suitable
location for mounting
the spotlight or change
the sensor area by
turning the motion
sensor housing
9
.
Reflections from
a swimming pool,
a pond or other
reflective surfaces
are registered as
movement.
Re-configure the
LUX controller or
find a more suitable
installation location.
The product
switches on
throughout
the day.
The LUX controller
is set too high.
Reduce the sensitivity
by turning the
LUX controller
anticlockwise.