To Next Page

To Previous Page

Assembly

WARNING: To avoid injury and to reduce the risk of electrical shock or re:

Replace the baery pack or charger immediately if the baery case or charger cord is damaged.

Always make sure the string trimmer switch is OFF before inserng or removing the baery pack.

Always make sure the baery pack is removed and the switch is OFF, before assembling, inspect-

ing, adjusng, or maintaining any other part of the string trimmer.

Read, understand, and follow the Baery Charger instrucons.

1. Unpacking

Carefully remove the machine and accessories from the box. Make sure that all items listed on

previous page are included. Inspect the machine carefully to make sure no breakage or damage

occurred during shipping. Keep the packing material unl you have carefully inspected and sat-

isfactorily operated the machine.

2. Charge the baery (Fig2)

WARNING: Never aempt to open the baery pack for any reason. If baery pack case is cracked

or damaged, do not insert into charger. Do not crush, drop or damage baery pack.

Do not use a baery pack or charger that has received a sharp blow, been dropped, run over or

damaged in any way (i.e., pierced with a nail, hit with a hammer or stepped on). Damaged bat-

tery packs should be returned to service center for recycling.

WARNING: Fire hazard. Do not store or carry baery so that metal objects can contact exposed

baery terminals. For example, do not place baery in aprons, pockets, tool boxes, product kit

boxes, drawers, etc.; with loose nails, screws, keys, etc.

Use the charger in normal room temperature whenever possible. To prevent overheang, do not

cover the charger and do not charge baery pack in direct sunlight or near heat sources.

Always unplug the charger from the power supply when there is no baery pack inserted.

-Insert the cord plug into an appropriate AC power outlet. The green LED light comes on indicat-

ing the adapter is ready for use.

-Connect the plug wire to the charger.

-Insert the baery pack into the charger, the green LED light will change to red to indicate

charge. The baery pack will only t into the charger one way; do not force the baery pack. Be

sure that the baery pack is fully inserted into the charger.

-The baery pack will be fully charged aer about 3 hours, and the red LED light will change to

green. Remove the cord plug from the power outlet and remove the baery pack.

AFTER SALE SUPPORT

support@sumec-na.com

1855 399 9415

MODEL: N1F-GT-250/18-D PRODUCT CODE: 45239 04/2015

Cordless Trimmer · 18V Lithium-ion Battery

ALDI N1F-GT-250/18-D User Manual

Questions and Answers: