ALDI N1F-GT-250/18-D - Page 15

Assembly
4. Assemble the auxiliary handle (Fig. 5)
-Loosen the auxiliary handle knob
-Rotate the auxiliary handle upside to comfortable posion.
-Tighten the auxiliary handle knob.
5. Extend the telescopic tube (Fig. 6)
-Loosen the telescopic knob.
-Extend the tube to comfortable posion.
-Tighten the telescopic knob.
6. Install and remove the baery (Fig.7 & 8)
WARNING! Make certain the lock-o buon is engaged to prevent switch actuaon before re-
moving or installing baery
-To install baery pack, push the baery pack into the slot of the machine, slide the baery pack
unl fully inserted with an audible click.
-To remove baery pack, depress the baery pack release buon, on the back of the baery
AFTER SALE SUPPORT
support@sumec-na.com
12
1855 399 9415
MODEL: N1F-GT-250/18-D PRODUCT CODE: 45239 04/2015
Fig.5 Fig.6
Fig.7 Fig.8
Cordless Trimmer · 18V Lithium-ion Battery