ALDI N1F-GT-250/18-D - Page 17

2. Convert to edging mode (Fig 11 & 12)
-Hold the main handle, push the collar downwards and rotate the lower housing 180°.
-Release the collar to x edger mode and posion the trimmer above the surface with
edge guard to operate as a maintenance edger.
-Restarng the machine aer complete stop will feed the spool line automacally.
-Return to the trimming posion by reverse rotaon aer pushing the collar downwards.
Note: Cung line will wear faster and require more feeding if the cung or edging is done along
sidewalks or other abrasive surfaces or heavier weeds are being cut.
Operation
3. Adjust the cung head (Fig 13 & 14)
-Push the head rotaon pedal to rotate the cung head to cut the grass under bush or tree.
-Push the head rotaon pedal to rotate cung head back to return trimming posion.
AFTER SALE SUPPORT
support@sumec-na.com
14
1855 399 9415
MODEL: N1F-GT-250/18-D PRODUCT CODE: 45239 04/2015
Fig.11 Fig.12
Fig.13
Fig.14
Cordless Trimmer · 18V Lithium-ion Battery