6
After Sales Support
Telephone: 1300 886 649
Getting Started
Before first use
• Remove all packaging materials from the product and dispose of them
responsibly. Plastic wrapping can be a suffocation hazard for babies and young
children, so ensure all packaging materials are out of their reach.
• Inspect the mains power adaptor for damage. Do not use the product if the
adaptor or its cord have been damaged or are not working properly. In case of
damage, contact the after sales support line for advice.
Transmitter / charging base connections
• Connect the mains power adaptor (supplied) to an electrical outlet.
• Connect the mains adaptor cable to the DC IN input socket at the back of the
transmitter/charging base.
• Using the supplied RCA audio cable, connect the transmitter to the relevant
audio outputs on your TV, hi-fi or other relevant audio component.
As soon as you have connected both the power adaptor to the mains outlet and
the audio cable to a signal source, the red LED signal indicator will light up. If it
remains off, switch on the audio source and increase its output level until the red
indicator light comes on.
Receiver headphone set
• Remove the battery cover from the left side (L) of the receiver headphone set.
• Insert two rechargeable AAA size batteries (supplied), taking care to ensure
correct polarity.
• Put the battery cover back onto the left side of the receiver headphone set.
• Switch off the receiver headphone set and place it into the transmitter to
charge the batteries for 24 hours before initial use. (See page 7 for more on
charging batteries.)
To Next Page
Loading...
General