Basic functions
26
and then the date in continuous alternation.
2. Each time you push the MEM button again,
first the number and then the data saved for
the next memory slot will be shown briefly in
descending order. Once the oldest memory slot
with the number 1 is reached, the indicator will
switch back to standby mode after pushing
the MEM button again and back to the most
recent memory slot (e.g. 8) if the MEM button is
pushed again etc.
If no measurements have been saved,
(-- -°C) with the memory indicator (
)
will appear on the display.
The following symbols may appear on the display
when accessing the measurements in the memory:
Symbol Explanation
Memory indicator for memory mode/
memory access
PM
PM indicator (“post meridiem” = after-
noon in 12-hour mode)
Saved ear temperature measurement
To Next Page
Loading...