Operation
31
5. Carefully remove the probe tip
4
of the ther-
mometer from your forehead and read the
measured temperature on the LCD display.
The symbol (
)
19
indicates that your fore-
head temperature has been measured. You can
now immediately start a new measurement.
If you want to immediately switch back to
standby mode, you can briefly push the
MEM button. The thermometer will also au-
tomatically switch back to standby mode
after approx. 1 minute of button inactivity.
Measuring object temperature
1. Please note: This method of performing mea-
surements is not suitable for measuring body
temperature!
2. Before measuring the temperature of an object
(liquid/surface), remove the push-on adapter
for measuring forehead temperature from the
thermometer.
3. Before performing the measurement, make
sure that the infrared sensor is clean.
4. Push the buttons (
) ear measurement
7
and
(
) forehead measurement
6
at the same
time. The indicator (
) for measuring the
temperature of objects
17
accompanied by
the indicator “food”on the display shows that
the object temperature measurement has been
activated.
To Next Page
Loading...