25
Basic functions
Memory mode
The thermometer saves the last 9 body temperature
measurements in your ear or on your forehead. The
current measurement will appear last in the mem-
ory. If all 9 memory slots are occupied, the oldest
measurement will be deleted from the memory.
1. In standby mode, hold the thermometer so that
the back of the thermometer points towards
you to display the saved measurements and
push the MEM button
9
.
The memory indicator ( )
15
(memory access)
and the number for the last measurement saved
(e.g. 8) will now briefly appear on the display.
Directly afterwards, the temperature measured
with the indicator for ear measurement ( )
18
or forehead measurement (
)
19
will be
displayed,
followed by the time
To Next Page
Loading...