Cleaning and maintenance
34
2. Each time before performing a measurement
or if the “Clean” warning indicator appears on
the display, check the infrared sensor and, if
necessary, carefully clean it with a cotton swab
soaked with a small amount of medical alcohol
and then immediately with a clean, dry cotton
swab.
3. Use a soft, dry cloth to clean the housing.
4. After cleaning, store the thermometer in a
clean, dry place at room temperature or set it
on the table rest
13
.
5. Never subject the thermometer to extreme
temperatures, moisture, direct sunlight or
vibrations!
“Clean” warning indicator
The thermometer has a special warning indicator
that reminds the user when to clean the infrared
sensor on the probe tip of the thermometer.
To Next Page
Loading...