AFTER SALES SUPPORT
17
1300 855 831
support@scheppach.com.au
MODEL: ASP12-ES PRODUCT CODE: 62361 10/2018
AUS
ASP12-ES Maintenance and cleaning/Troubleshooting
Cleaning
It is recommended to clean the appliance after each use.
Never direct a water jet against the appliance, nor clean the appliance under
owing water. This could give rise to the danger of electric shock and damage
the appliance!
Always keep the appliance clean. Do not use any detergents or solvents.
• Always keep the ventilation slots clean and free from dirt and dust.
• Clean the container (7) with a damp cloth.
• Wash the foamed plastic lter (12) with lukewarm water and soap and allow to dry.
• Beat the dust out of the additional lter (16) and clean it with a paint brush or hand
brush.
• Replace the paper bag (13) when full.
Replacement parts
Replacement parts can be ordered (e.g. paper bag, lter) at the After Sales Support.
X. Troubleshooting
Problem Possible Cause Action
Appliance does not
start.
Mains voltage is not present.
Check plug socket, cable, line,
plug and fuse, where approp
-
riate, repair through electrical
specialist.
Defective On/O switch.
Repair through customer
service.
Worn carbon brushes.
Defective motor.
Low or lack of
suction.
Hose system or nozzles
blocked.
Remove obstructions and
blockages.
Container open. Close container.
Container full. Empty container.
Dust or dirt is blow
out of the device.
Filter are not or not correctly
assembled.
Use missing lters or check the
correct position of the lter.
To Next Page
Loading...
Need help?
General
