To Next PageTo Next PageWhat to do if my ALDI WORKZONE HCE1400 motor starts but there's no pressure?
If the motor of your ALDI Pressure Washer starts but no pressure builds up, it could be due to: * Air intake in the water inlet. Check the supply hose and hose connectors, replacing them if necessary. * Insufficient water supply. Ensure the water supply is turned to full flow.
Why is the operating pressure of my ALDI Pressure Washer irregular?
Irregular operating pressure in your ALDI Pressure Washer can be caused by air intake in the water inlet. Inspect the supply hose and hose connectors, and replace them if needed.
How to troubleshoot an ALDI WORKZONE HCE1400 Pressure Washer that won't start?
If your ALDI Pressure Washer isn't working, there could be several reasons: * Check the fuse, power cable, and plug. If necessary, have them replaced by qualified personnel. * Ensure the extension cable has a sufficient cross-section and isn't too long. Use shorter or thicker extension cables. * Verify the mains voltage matches the specified voltage. Contact your power supply company if it's too low. * Inspect the pressure washer for freezing. Thaw it if necessary.
General| Power | 1400 W |
|---|---|
| Max. Pressure | 110 bar |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Cable Length | 5 m |
Keeping the work area clear and safe from hazards.
Essential electrical safety measures for preventing shocks.
Personal safety guidelines including protective equipment and awareness.
Best practices for operating and maintaining the power tool.
Details residual risks like lung damage, hearing damage, and vibration effects.
Guidelines for servicing and replacing damaged parts.
Highlights dangers of improper operation and misuse of the cleaner.
Details on sound pressure, sound power, and vibration levels.
