of
delivery/lntended use HMSOMP
42.
Switch for
switching
speeds
a) 90' angle
gauge
(not
supplied)
b) 45' angle
gauge
(not
supplied)
c) Allen
key, 6 mm
d) Counter nut for adjustment screw
lll.
Scope
of delivery
1700W
Sliding
Mitre Saw
1 x Clamping device
(8)
2 x Workpiece support
(9)
1 x Dust bag
(21)
1 x Allen key
(c)
3 x LR44 Battery
:
(pre-installed)
1 x Operating manual
.
Open the
packaging
and remove the device carefully
.
Remove the
packaging
material as well as the
packaging
and transport bracing
(if
available)
.
Check that the delivery
is
complete
.
Check the device and accessory
parts
for transport damage
.
lf
possible,
store the
packaging
until the
warranty
period
has expired.
A Attention!
The device
and
packaging
materials are not toys!
Children must not be
allowed
to
play
with
plastic
bags,
film
and small
parts!
There
is
a
risk of swallowing and suffocation!
lV. lntended use
The trim, mitre and bevel saw is used to
mitre wood, materials similar
to wood,
plastics
and non-ferrous metals, with the exception of magnesium and alloys con-
taining
magnesium, according
to the
machine size.
Warning! The supplied saw blade is only
intended
fdrthe sawing of wood! Do not
use
this blade
for the sawing of
plastic!
The
equipment is
to be used
only for
its
prescribed purpose.
Any
other
use is
deemed to
be
a case of
misuse
The user
/ operator and not the manufacturer will
be liable for any damage or injuries of any kind caused as a result of this.
The
equipment is to be operated only with suitable saw blades. lt is
prohibited
to use
any type of cutting-off
or
grinding
wheel.
To use the equipment
properly you
must also observe the safety information, the
assembly instructions and the operating
instructions
to be found in this manual.
12
E
support@scheppach.com.au
AFTER
SALES
SUPPORT
MODEL: HM80MP PRODUCT CODE: 53666 06/20'17
t
^us
1300 955 931
To Next Page
Loading...
