What to do if the ALDI Workzone Titanium HM80MP Saw motor does not work?
If the motor, cable, or plug is defective, or the fuses are burnt, have a specialist inspect the machine. Never attempt to repair the motor yourself due to the danger involved. Check the fuses and replace them if necessary.
Why does my ALDI Workzone Titanium HM80MP motor overheat easily?
The motor may overheat easily due to overloading or insufficient cooling. To resolve this, avoid overloading the motor while cutting. Also, remove dust from the motor to ensure optimal cooling.
What to do if the ALDI Saw motor does not reach its full power?
If the motor does not reach its full power, it may be due to overloaded circuits in the network (lamps, other motors, etc.). Avoid using other equipment or motors on the same circuit.
Why does the ALDI Workzone Titanium HM80MP motor start slowly and not reach operating speed?
The slow start and failure to reach operating speed can be caused by voltage being too low, damaged coils, or a burnt capacitor. Contact the utility provider to check the voltage. Have a specialist inspect the motor. Have a specialist replace the capacitor.
Why is the ALDI Saw cut rough or wavy?
A rough or wavy saw cut may be due to a dull saw blade or a tooth shape that is not appropriate for the material thickness. Resharpen the saw blade and/or use a suitable saw blade.
Why does the ALDI Saw motor make excessive noise?
Excessive noise from the motor may indicate damaged coils or a defective motor. Arrange for inspection of the motor by a specialist.
What to do if the ALDI Workzone Titanium HM80MP Saw workpiece pulls away and/or splinters?
If the workpiece pulls away or splinters, it may be due to excessive cutting pressure and/or a saw blade not suitable for use. Insert a suitable saw blade.
How to fix reduced cutting power when sawing with an ALDI Saw?
If you experience reduced cutting power when sawing, it could be because the saw blade is too small (ground too much). Readjust the end stop of the saw unit.
Diagram showing the main parts of the sliding mitre saw with numerical labels.
Illustrations providing close-up views of specific components and their details.
Illustrations detailing various operational aspects and functions of the saw.
Explains the meaning of various symbols used throughout the manual for safety and operation.
Provides recommendations for safe use and outlines manufacturer liability.
A comprehensive list of all numbered parts of the sliding mitre saw.
Lists included items and defines the product's intended use and limitations.
Guidelines for maintaining a safe work area and protecting the operator.
Covers correct tool use, appropriate clothing, PPE, and dust management.
Ensures electrical safety, proper cable use, and regular tool condition checks.
Instructions for safe saw blade handling, replacement, and basic tool maintenance.
Guidelines for safely transporting the saw and handling saw blades.
Safety measures to prevent injury from laser beam exposure.
Safe practices for handling, using, and disposing of batteries.
Pre-operation checks, setup requirements, and awareness of residual risks.
Steps for assembling the saw, attaching the dust bag, and using the laser guide.
Instructions for changing saw speed and performing a 90-degree crosscut.
Guides for executing crosscuts and mitre cuts at various angles.
Setting cutting depth and precisely adjusting for 90-degree crosscuts.
Performing double mitre cuts and adjusting turntable angles.
Precise adjustment procedure for 45-degree mitre cuts.
Step-by-step instructions for safely changing the saw blade.
Details on power, speed, dimensions, weight, and laser specifications.
Information on sound pressure and sound power levels, and vibration.
Instructions for safely transporting, storing, and maintaining the saw.
Procedures for cleaning, oiling, and checking carbon brushes.
Guidelines for connecting the saw to mains power and using extension cables.
Information on how to dispose of the equipment and packaging responsibly.
A guide to identifying and resolving common issues with the saw.
Details ALDI's product guarantee, satisfaction policy, and return instructions.
To Next Page
General
