@
Safety regulations
HMSOMP
out ofthe reach of children.
6 Do
not
overload
your
electric tool
-
They work better and more safely in the specified output range.
7
Use the
correct electric tool
-
Do not use low-output electric tools for heavy work.
-
Do
not
use the electric tool for
purposes
for which it is not intended. For ex-
ample, do not use handheld circular saws forthe
cutting of branches or logs.
-
Do not use the electric tool to
cut
flrewood.
I Wear suitable clothing
-
Do not wear wide clothing or
jewellery,
which can become entangled
in mov-
ing
parts.
-
When
working
outdoors, anti-slip footwear is recommended
-
Tie long hair back in a hair net
9 Use
protective
equipment
-
Wear
protective goggles.
-
Wear a mask when carrying out dust-creating
work.
10 Connectthe dust extraction device if
you
will be
processing
wood, materials
similar to wood, or
plastics
-
ATTENTION!
The dust extractor
must
not be connected when
processing
metals. Risk of fire and explosion due to hot swarf or flying
sparks! When
processing
metals, also remove the dust bag
(21).
-
lf connections
for dust extraction and a collecting device are
present,
make
sure that
they
are connected
and used
properly.
-
When
processing
wood,
materials similarto wood, and
plastics,
operation
in enclosed spaces is only
permitted
with the use of a
suitable extraction
system.
ll Do
not
use the cable for
purposes
forwhich it is not intended
-
Do not
use the
cable
to
pull
the
plug
out of the outlet Protectthe cable from
heat, oil and sharp edges
12 Secure the workpiece
-
Use the clamping
devices or a vice to hold the workpiece in
place.
ln this
manner, it is held more
securely than
with
your
hand.
-
An additional
support is necessary
for
long workpieces
(table, trestle,
etc.) in
order to
prevent
the machine from tipping over.
-
Always
press
the workpiece
firmly against the working
plate
and stop in
order to
prevent
bouncing and
twisting
of the workpiece
13 Avoid abnormal
posture
-
Make sure that
you
have
secure footing and always maintain
your
balance.
-
Avoid
awkward hand
positions
in which a sudden
slip could cause one or
both hands to come into
contact with the saw blade.
14 Take care of
your
tools
-
Keep cutting tools sharp
and clean
in
order to be able to work better and
more safely.
14
AFTERSALES SUPPORT
E support@scheppach.com.au
$
rus
IJQQ 855 831
MODEL: HM80MP PRODUCT CODE:
53666 06/2017
To Next Page
Loading...
