Why won't my ALDI Saw start?
Your ALDI Saw might not start because the mains plug isn't fully inserted into the socket. Make sure to insert it properly. Another reason could be a triggered fuse. Try replacing the fuse or switching it back on if you have a circuit breaker.
What to do if the inserted saw blade has come loose on my ALDI Saw?
If the saw blade of your ALDI Saw comes loose, it might not have been inserted correctly. Ensure you insert the saw blade properly. Also, check that the rotary toggle has snapped back into the locked position after reinserting the blade.
Why is the cutting power of my ALDI Saw poor?
The cutting power of your ALDI Saw may be poor because the saw blade is blunt. You can have the saw blade sharpened or replace it with a new one. Also, the saw blade might be unsuitable for the material you're cutting. Ensure you use a saw blade suitable for the material.
What to do if the cuts are imprecise with my ALDI Saw?
If you're experiencing imprecise cuts with your ALDI Saw, the saw blade might be bent. You should replace it with a new saw blade.
How to prevent saw blade from deviating sideways on ALDI Saw?
If the saw blade of your ALDI Saw deviates sideways, it could be due to applying too much pressure on the saw blade. Reduce the pressure you're applying. Alternatively, the number of strokes used might be too high for the material. Try sawing at a lower stroke rate.
Lists the reciprocating saw and saw blade included in the package.
Explains manual handling, storage, and proper application of the reciprocating saw.
Details potential risks and explains symbols used in the manual and on the product for safety.
Covers general safety, electrical precautions, and personal conduct during operation.
Details safe tool handling, operation, and specific precautions for the reciprocating saw.
Addresses health risks from dust, noise, vibration, and general injury prevention.
Describes the reciprocating saw, its parts, and critical specifications like cutting depth.
Guides on checking the product and package, and general precautions before first use.
Explains how to insert or change the saw blade and adjust the saw shoe for cutting depth.
Covers adjusting saw alignment and setting the stroke rate limit.
Provides instructions for connecting the saw and detailed procedures for normal and continuous sawing.
Addresses common operational issues and their corresponding solutions, including LED work light function.
Details how to clean, inspect, maintain, and properly store the reciprocating saw.
Provides technical data like model, power, and noise/vibration information.
Guides on the proper disposal of packaging materials and the product itself according to regulations.
Contains compliance information and customer support/warranty details.
To Next Page
General
