Explanation of symbols
5
Residual risks
Despite proper use, inconspicuous residual risks cannot be completely ruled out.
The following risks may arise due to the design of the product:
• Touching the exposed areas of the saw blade;
• Reaching into the rotating saw blade (cut injury);
• Tools or tool parts flying around;
• Kickback of the work piece and parts of the work piece if used improperly;
• Hearing damage as a result of working without hearing protection;
• Lung damage as a result of inhaling sawdust;
• Fire hazard due to insufficient ventilation.
Explanation of symbols
The following symbols are used in this user manual, on the product or on the
packaging.
This symbol provides you with useful supplementary information on
assembly or operation.
Declaration of conformity (see chapter ‘Declaration of conformity’):
Products marked with this symbol meet all applicable Community
regulations for the European Economic Area.
Read the user manual.
Wear protective goggles.
Wear a dust mask.
Wear ear protection.
Wear suitable protective gloves.
This symbol identifies products that belong to protection class II.
To Next Page
Loading...
Need help?
General
