Cleaning and maintenance
22
Cleaning and maintenance
WARNING!
Risk of injury!
Accidentally starting the product may result in severe injury caused by the saw
blade.
− Always switch the product off and pull the mains plug out of the socket when
you are not using the product, when cleaning it, servicing it, replacing parts
or in the event of a fault.
WARNING!
Risk of injury!
Incorrect repairs or modifications may impair the operating safety of the product
and invalidate the warranty.
− Do not make any modifications to the product.
− All repair work must be carried out by trained personnel.
WARNING!
Risk of injury!
Improper handling may result in severe injury.
− Wear suitable protective gloves.
− Let the product cool down completely before starting to clean it.
− Remove the saw blade before starting to clean the product.
− Remove the saw blade before transporting the product.
NOTICE!
Risk of damage!
Water or other liquids that have penetrated the housing may cause a short circuit.
− Never submerge the product in water or other liquids.
− Make sure that no water or any other liquids get into the housing.
To Next Page
Loading...
Need help?
General
