HMSOMP lntended use/Safety
All
persons
who use and service the equipment have to be acquainted with this
manual and
must
be informed
about
the
equipment's
potential
hazards lt is also
imperative to observe the accident
prevention
regulations in force in
your
area.
The same applies
for the
general
rules of health
and
safety
at
work.
The manufacturer will not be liable for any changes
made
to the equipment
nor
for
any damage resulting
from such changes. Even when the equipment
is used
as
prescribed
it is still impossible to eliminate certain residual risk factors. The fol-
lowing
hazards may arise in connection with the machine's construction and
design:
.
Contact with the saw blade in the uncovered saw zone.
o
Reaching into the running saw blade
(cut
injuries).
.
Kick-back of workpieces and
parts
of
workpieces.
r
Saw blade fracturing
o
Catapulting of faulty carbide tips from the saw blade.
.
Damage to hearing if ear-muffs
are
not used as necessary.
.
Harmful
emissions of wood
dust
when used in closed rooms.
Please note that our equipment has not been designed for use in commercial,
trade
or industrial
applications.
Our warranty will
be
voided if the equipment is
used in commercial, trade or industrial businesses
or for
equivalent
purposes.
V.
Safety
regulations
Attention! The following basic safety measures must be observed when using
electric
tools for
protection
against electric shock, and the risk of injury and
flre
Read all these notices before using the electric
tool and keep the
safety
instruc-
tions for later reference.
Safe work
1
Keep
the
work area orderly
-
Disorder in the work area can lead to
accidents.
2 Take environmental
influences into account
-
Do not expose electric tools to rain.
-
Do
not
use electric tools
in a damp or wet environment
-
Make sure that the work area is well-illuminated.
-
Do not use electric tools
where there is a risk of.fire or explosion.
3 Protect
yourself
from electric shock
-
Avoid
physical
contact with earthed
parts
(e
g pipes,
radiators, electric rang-
es, cooling
units).
4 Keep children away
-
Do not allow
other
persons
to
touch
the equipment or cable, keep them away
from
your
work
area.
5 Securely store unused electric tools
-
Unused electric
tools should be stored in a dry, elevated or closed location
AFTER
SALES SUPPORT
E support@scheppach.com.au
MoDEL:HM8OMP PRODUCT CODE: 53666 06/20'17
13
t -' 1300 855 831
To Next Page
Loading...
