ALDI Workzone Titanium HM80MP - Laser and Battery Safety Instructions; Laser Radiation Precautions; Battery Handling and Disposal

HMSOMPregulations
@
Safe$
Ar Attention: Laser radiation
A ?;$;':::'"'thebeam
Attention!
-
laser radiaiion
Do not stare into beaml
d6s 2 laser
pducr
la$r srtutff a@dins
lo
EN
6@2+1:2014
A=650nm R<1nW
Protect
yourself
and
you
environment
from accidents
using
suitable
precau-
tionary
measures!
o
Do not look directly into the laser
beam
with unprotected eyes.
o
Never look into the
path
of the beam.
r
Never
point
the
laser beam towards reflecting surfaces and
persons
or
animals.
Even a laser beam with a low output can cause damage to the eyes
o
Caution - methods otherthan those specified here can result in dangerous radi-
ation exposure.
r
Never open
the laser module. Unexpected exposure to the beam can occur.
o
lf the
mitre
saw is not used
for
an extended
period
oftime, the batteries should
be removed.
r
The laser may not be replaced with
a
different
type
of laser.
o
Repairs of the laser may only be
carried
out by the laser manufacturer or an au-
thorised representative.
Safety instructions for handling batteries
1 Always make sure that the batteries are inserted with the
correct
polarity
(+
and
-),
as indicated on the
battery.
2 Do not short-circuit batteries
3 Do not charge non-rechargeable batteries.
DANGERif
sallowed
4
Do
nOt oVercharge batterieS!
5 Do not mix
old
and new batteries
or batteries of
different
types or
manufacturers!
Replace an entire set of batteries at the same time.
6
lmmediately remove used batteries from
the device and dispose of them
prop-
erly!
7 Do not allow batteries to heat up!
8 Do not
weld or
solder
directly on batteries!
9 Do not dismantle batteries!
l0 Do not
allow batteries to deform!
I I Do not throw batteries into fire!
12 Keep batteries out
of the
reach
of children
13 Do not allow children
to
replace
batteries without supervision!
14 Do not keep batteries near flre,
ovens or other sources of heat. Do not use
batteries in direct sunlight or store them in
vehicles in hot weather.
18
E su
pport@scheppach.com.au
AFTER
SALES SUPPORT
MODEL: HM80MP PRODUCT
CODE: 53666 06/2017
!
ru;.
ltQQ 855 831