AFTER SALES SUPPORT
0151 649 1500 1890 946244
www.einhell.co.uk
32
Set up Wet & Dry Vacuum Cleaner – WZVC 1930 SA
6. Fitting the optional paper dirt bag
27
(Not supplied) to the vacuum cleaner
(See Fig. 12a - 2b)
– As an option you can purchase a paper dirt bag from the manufacturer via the contact
information or service address indicated on the warranty card, or the contact information
at the foot of the pages.
– For vacuuming fi ne, dry dirt it is recommended that you also fi t the paper dirt bag
27
.
This will ensure that the pleated fi lter
15
does not clog up as quickly and help maintain
the vacuuming power. It also makes it easier to dispose of the dust.
– You will need to provide the product data and part number of the debris bag, from the
Ordering replacement parts section on Page 42.
– If you purchase a paper dirt bag
27
, then it can be fi tted to the shredder as below:
Slip the dirt bag
27
over the internal hose outlet
Y
on the inside of the metal tank
8
(See Fig. 12a - 12b).
Fig. 12a
27
Fig. 12b
27
Y
8
7. Fitting the suction hose (Fig. 13a - 13e)
– Connect the suction hose
11
to the corresponding connector on the wet and dry
vacuum cleaner, depending on the application required. To extend the suction hose
11
you can attach one or more of the elements which make up the 3-part suction
tube
12
to the suction hose
11
.
8. Vacuuming
– Connect the suction hose
11
to the suction hose connector
9
.
9. Blowing
– Connect the suction hose
11
to the blow connector
10
.
72115_2342197_11016_UG.indd 32 16/05/2016 10:07 am