0151 649 1500 1890 946244
www.einhell.co.uk
38
Wet & Dry Vacuum Cleaner – WZVC 1930 SA
Cleaning
CAUTION!
Always set the On/Off switch
2
to Stop (0) & disconnect
the 13A plug from the mains supply, before starting any
cleaning and maintenance work! (See Fig. 1). Risk of
electric shock.
Carrying out any cleaning work
– Clean the machine regularly. We recommend that you clean the vacuum cleaner
immediately after you use it. This will help to keep the machine in good working
order and is the basis for a long working life.
– Keep all safety devices, air vent slots and the motor unit free from dust and debris as
far as possible while you work.
1. Cleaning the motor unit
– Clean the plastic body and other plastic parts with a mild household cleaning
agent and a damp cloth. Do not use any aggressive agents or solvents for cleaning
purposes as these may be aggressive to the plastic parts of the equipment. Never
clean the vacuum cleaner by spraying it with water.
2. Cleaning the metal tank
–
The metal tank can also be cleaned with a mild household cleaning agent and a
damp cloth. Depending on the amount of dirt, if the motor unit is removed from the
metal tank, then the metal tank can also be cleaned under running water.
CAUTION!
Prevent water getting inside the motor unit of the
vacuum cleaner at all cost. Risk of electric shock.
72115_2342197_11016_UG.indd 38 16/05/2016 10:07 am
To Next Page
Loading...
Need help?
General
