ALDI WZVC 1930 SA User Manual

AFTER SALES SUPPORT
0151 649 1500 1890 946244
www.einhell.co.uk
36
Use
Wet & Dry Vacuum Cleaner – WZVC 1930 SA
CAUTION!
When wet vacuuming, the floating safety switch
5
loses when
the maximum tank level is reached. At the same time, the suction
noise of the equipment will change and become louder. You must
then switch off the vacuum cleaner and empty the tank.
]
CAUTION!
The wet and dry vacuum cleaner is not suitable for the vacuuming
of combustible liquids. For wet vacuuming, use only the supplied
foam filter. Do not vacuum liquids with a temperature above 40°C.
6. Automatic mode (See Figs. 1 & 14)
– Connect the 13A plug and power cable of your electric tool to the automatic socket-outlet
6
and connect the suction hose
11
to the vacuuming connector of your electric tool.
Check that the connections are secure and air-tight.
Set the switch
2
on the wet and dry vacuum cleaner to position 'AUTO' (automatic
mode). The moment you switch on the electric tool, the wet and dry vacuum cleaner
switches on as well. When you switch off the electric tool, the wet and dry vacuum cleaner
switches off as well after a pre-set delay.
7. Blowing (See Fig. 13b)
– Connect the suction hose
11
to the blow connector
10
on the wet and dry vacuum
cleaner.
72115_2342197_11016_UG.indd 36 16/05/2016 10:07 am

ALDI WZVC 1930 SA Specifications

General

Brand	ALDI
Model	WZVC 1930 SA
Category	Vacuum Cleaner
Language	English