10
4 USE
4.1 BABY-UNIT:
Switching on/off:
• Slide the switch at the right side upward to switch
on the baby unit.
• Slide this switch downward to switch off the baby unit.
The green indicator on the baby unit ashes while the baby
unit is trying to establish a connection with the parent unit,
this indicator remains lit when the connection is successful.
Volume:
Use the VOL+ and VOL- buttons to adjust the reception
volume for the talk-back function from the parent unit.
Automatic night vision:
The baby unit is provided with built-in infra-red LEDs; these
LEDs will switch on automatically when the baby room
turns dark and will switch of again when it becomes light.
The LEDs can illuminate objects up to a distance of
approximately 2 meters.
When it’s dark, that is when the night vision LEDs are
switched on, the images on the parent unit will be
displayed in black and white.
Attention: infra-red light cannot be perceived by the
human eye; that means you cannot tell whether the
infra-red LEDs are switched on with the naked eye.
Depending on the type of the infra-red LED, you might
be able to see a red glow.
4.2 PARENT UNIT:
Switching on/off:
• press briey to switch on
• press and hold for 2 seconds to turn off
Volume:
Use the VOL+ and VOL- buttons to set the loudness of
the sounds from the baby room that you hear through the
speaker of the parent unit
To Next Page
Loading...
Need help?
General
