EasyManua.ls Logo

Alecto DVM-77 - Tips and Warnings; General; Installation; Interference-Free

Alecto DVM-77
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16
6 TIPS AND WARNINGS
6.1 GENERAL:
• Thoroughly read the user’s manual and follow all
indications.
• Never place the baby unit or parent unit in wet or
humid room or environment.
• Ensure adequate heat dissipation; never cover the
parent unit, the baby unit and/or the power adapter(s)
and never place them directly next to a heat source.
• Only use the supplied adapter(s); connecting a diffe-
rent type of adapter will damage the electronics.
• Make sure the adapter cables are free of any damage
and ensure nobody can trip or fall because of these
cables.
• Never dismantle the parent unit, the baby unit and/
or the power adapter(s); only qualied personnel is
authorized to do so.
6.2 INSTALLATION:
• Only connect or disconnect the power adapter to/from
the baby unit or parent unit when the power adapter is
removed from the wall socket.
• Never install the DVM-77 during thunder storms.
• Never touch any non-isolated adapter cables, unless
the adapters are removed from the wall socket.
6.3 INTERFERENCE-FREE:
• This baby display monitor is digitally coded. This me-
ans you will never receive signals from other devices,
nor can the signal from your baby unit(s) be received
by e.g. your neighbors.
• In case the baby unit(s) or parent unit is placed in or in
the close vicinity of electromagnetic elds, the signal
(images or sound) can be slightly affected. If this
happens, try a different location for the baby unit(s)
or parent unit or move, if possible, the source of the
interference.