EasyManua.ls Logo

Alecto IVM-180 - Tips and Warnings; General Tips and Warnings; Malfunction Troubleshooting

Alecto IVM-180
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14
6 TIPS AND WARNINGS
6.1 General:
Read the instruction manual carefully and follow all the instructions.
Do not place or use the camera in a wet place or damp environment.
Ensure proper ventilation for the heat; never cover the camera unit and/or the power adapter(s),
and never place it directly next to a heat source.
Only use the supplied adapter(s); using a different type of adapter may cause damage to the
electronics.
Make sure the power cables are not damaged, and ensure the wires will not lead to stumbling or
falling over.
Never take apart the camera unit and/or the power adapter; this should only be done by quali ed
personnel.
The video connection is transferred through the public Internet and the connection is secured
as much as possible by today’s standards. Nevertheless it can still be hacked, and if for some
reason this occurs, we assume no responsibility. We advise you to change the default password
immediately (see section 4.3 Wi-Fi settings), preferably with a combination of letters, numbers
and symbols.
6.2 Installation
Only connect or disconnect the power adapter when it is unplugged from the electrical wall outlet.
Do not install the camera during a thunderstorm.
Do not touch an un-insulated adapter cord unless the adapter is disconnected from the electrical
outlet.
6.3 Maintenance
Clean the camera with a damp cloth, do not use any chemical cleaners. Before cleaning, the
power adapter should be disconnected.
6.4 Malfunction
If the camera does not show an image or the sound does not work, check the following:
- Has the camera been turned on?
- The correct UID code has been used
- The correct password has been used
-The camera is correctly registered to your network

Related product manuals