Service Guide
3640 3640-B
3641 3641-B
3643
3644 3644-C
Alemite Corporation
167 Roweland Drive, Johnson City, Tennessee 37601
www.alemite.com
Copyright
©
2004 by Alemite Corporation
This document contains confidential information that is the property of Alemite Corporation
670824
and is not to be copied, used, or disclosed to others without express written permission.
Revision (10-04)
SER 3640
Refer to Figure 2-A
for configuration on each model
Description
The metered control valves in
model series 3640 are designed to
meter a variety of fluids.
The valve assembly dispenses
motor oils (SAE 5-50), gear oils (SAE
80-240), automatic-transmission fluid,
antifreeze (ethylene glycol), and
hydraulic fluid.
IMPORTANT: The valve is
NOT intended to meter
brake fluid, windshield
wiper fluid, or antifreeze and
water solution.
Each control valve:
• can automatically dispense a
preset quantity of fluid or
manually dispense
• includes an inlet swivel that
contains a strainer
Electronic Preset Metered Control Valve
Figure 1
Electronic Preset Metered Control Valve Model 3640 Series
Model 3641 Shown
Inlet
Connection
Accuracy
Delivery Units of Measure
(
Totalizer Unit of Measure
)
Flow Range Temperature Range
Maximum Operating
Pressure
gpm lpm
°
F
°
C
psi bars
1/2 " NPTF (f) +/- 0.5 %
Pints, Quarts, Gallons
(Gallons)
Liters
(Liters)
0.25 to 8 1 to 30 20 to 120 -5 to 50 1000 67
Table 2
Electronic Preset Metered Control Valve Model 3640 Series Specifications
Valve Model Extension Nozzle Type
3640
Oil
Rigid
Non-Drip Automatic
3640-B Non-Drip Manual
3641
Flexible
Non-Drip Automatic
3641-B Non-Drip Manual
3643 Gear Oil
Rigid
Non-Drip Automatic (with Manual Lock)
3644 (Obsolete)
Oil
Non-Drip High-Volume Automatic
3644-C Non-Drip High-Volume Manual
Table 1
Electronic Preset Metered Control Valve Model 3640 Series Designation
To Next Page
Need help?
General
