（1）（2） （3）
（8） （7） （6） （5） （4）
1.Put the (P80A) pedal and SMPS Adaptor in the Right Polyfoam and tape together .
2.Put the piano body into the plastic bags.
LQS8/9 work instruction for packaging page. 1
Instruction：
7.Put on the Upper middle Polyfoam.
4.Put the user manual and Music stand into tablature plastic bags,Then mounted on the cardboard with tape.
8.Sealing.
5.Put on the Music stand into the carton ,and put the down middle Polyfoam on the Music stand.
3.Put on the left and right polyfoam to the piano body.
6.Put the piano in the carton(The keybed should follow the arrow on the polyfoam).
Arrow for the keybed
To Previous Page
Loading...
Need help?
General
