Need help?Do you have a question about the Alesis MultiMix 6 USB and is the answer not in the manual?
Inputs| line input impedance | 10 KΩ |
|---|---|
| line sensitivity for max output | 5.5 mV ~ 4.9 V RMS |
| mic input impedance | 600 Ω |
| mic sensitivity for max output | 700 mV RMS |
| line sensitivity for max output (CH 3 – 6) | 700 mV RMS |
Outputs| line output | 7 V RMS max |
|---|---|
| headphone output power | 0.5 W into 47 Ω |
Signal Characteristics| signal-to-noise ratio (line) | > 92 dB |
|---|---|
| signal-to-noise ratio (mic) | > 62 dB |
| distortion | < 0.02% |
Frequency Response| line frequency response | 20 Hz – 20 kHz (± 0.5 dB) |
|---|---|
| mic frequency response | 20 Hz – 15 kHz (± 0.5 dB) |
| channel equalizer bass | ± 14 dB @ 80 Hz |
Additional Features| channel equalizer treble | ± 14 dB @ 12 kHz |
|---|---|
| channel fader kill | > 90 dB @ 1 kHz |
| crosstalk | > 85 dB @ 1 kHz |
Power| power adapter voltage | 10 V AC |
|---|---|
| power adapter current | 500 mA |
| interface | USB1.1 or higher |
To Next Page
