26
4.2 PAGE 2: ASSIGN SOUNDS TO PADS
The display shows the currently selected pad number and the sound assigned to that
pad.
FATSNARE
PAGE
001
DRUM SET
DRUM
You can assign any of the Performance Pad's sounds to any of the pads, or to more
than one pad. Each individual Drum Set can have its own drum sound assignment.
To assign a sound to a pad:
1. Hit the pad.
2. Enter the desired drum sound number with the number or INC/DEC buttons.
3. When the display confirms your choice, either store the edited Drum Set (see
section 4.8) or do more assignments by striking another pad to select it, and assigning
a drum sound to it.
4.3 PAGE 3: SET PAD VOLUME (VOLUME)
The display shows VOLUME, the currently selected pad number, and the volume of
the sound assigned to that pad.
VOLUME
PAGE
99
DRUM SET
DRUM
To change the volume associated with a given pad:
1. Press the pad (the display will show the pad number).
2. Enter the desired volume, from 00 (full off) to 99 (maximum volume), with the
number or INC/DEC buttons.
3.When the display confirms your choice, either store the edits you've made (see
section 4.8) or do more assignments by striking another pad to select it, then assigning
the pad volume.
To Next Page
Loading...
Need help?
General
