Editing Effects: Chapter 7
QuadraSynth Plus Piano Reference Manual 137
Configuration #2: 4-Sends, 2 Reverb
Delay 1Pitch 1 Reverb 1
Mono delay Mono chorus Plate 1
Stereo chorus Plate 2
Room
Hall
Large
Gate
Reverse
Reverb 2
Level to Reverb 1
Pitch 3 Reverb 3
Mono chorus Plate 1
Plate 2
Room
Hall
Large
Gate
Reverse
Reverb 4
Reverb 4
Level to Reverb 3
This Configuration differs from Configuration #1 in many ways. In this
Configuration, there is only one Delay effect, two Pitch effects and two
Reverb effects. Effect send 1 is routed through the mono Delay, then a
stereo Pitch effect, and finally a stereo Reverb effect. Send 2 has no
effects of its own, but can be routed to the same Reverb effect as send 1.
Send 3 is routed through a mono Pitch effect, and then a stereo Reverb
effect. Send 4 has no effects of its own, but can be routed to the same
Reverb effect as send 3.
To Next Page
Loading...
