Alesis QuadraSynth Plus - Controllers A - D Mode

Global Settings: Chapter 8
QuadraSynth Plus Piano Reference Manual 168
Example: If you adjusted Controller A (using Quad Knob [1]) to, say, a value of 25
and then you recalled a different Program, the value of Controller A would
remain at 25 if the “A–D Reset” function was turned off. Alternatively, the
Controller A value would reset to 0 if this function was turned on.
Controllers A – D Mode
The “A–D Mode” function (Local, MIDI, or Both) determines whether the
Controllers A–D will have an affect on the currently selected Program or Mix, or
will only send out controller data via the MIDI Out connector, or do both. Use
Quad Knob [4] to turn this on or off.