Editing Mixes: Chapter 5
QuadraSynth Plus Piano Reference Manual 69
MIDI CH 1, and 1 is underlined, you'll hear it. All other ranges or layers will not
respond to the keyboard (they will continue to respond to incoming MIDI
messages on their respective channels, however).
Use the MIDI [♦] and [∅] buttons to hear each channel in turn.
OUT 1 — OUT 16. The QuadraSynth Plus will generate MIDI messages from the
keyboard, regardless of the Range settings for that channel in the Mix, but it will
not play the internal sound. Use this mode if you're using a MIDI sequencer
with an ECHO feature--the sound will be activated by messages appearing at the
MIDI IN connector after it’s made the “round trip” through the sequencer. This
is the QuadraSynth Plus’s equivalent to LOCAL OFF.
To Next Page
Loading...
