Alesis SR-16 - SR-16 Quick Setup; Connection and Power-On Procedure

SR-16 Quick Setup (English)
As you hook up the SR-16, the volume control on
your power amp and the SR-16 should be all the
way down, and power to both units should be off.
VOLUME
3 Plug the AC adapter cord
into the 9V AC jack and
the adapter into a wall
socket. 2 If you have a couple of
footswitches, plug
them into the
Start/Stop and
Count/A/B/Fill jacks.
1 Plug 1/4" mono
cords from the
main outputs to an
amplifier, mixer, or
stereo system.
4 Turn on the
unit.
5 Tap the pads
to hear drum
sounds.
6 Adjust
the volume.
3
12VDC